Safe, precise and fast

CNC TEST BAR MILLING MACHINE

Model no. 1812
Sample preparation

Precise and fast milling

The CNC test bar milling machine enables bar-shaped plastic samples to be produced for tension, pressure, bending and flexural impact tests in accordance with a wide range of standards. The CNC milling machine is a table-top unit with electrically locking protective doors. Pre-configured machining programs for all common bar shapes and visualisation via Windows make it very easy to operate the milling machine. Up to five test bars can be produced in one milling process. The all-round enclosure ensures safety at the workstation during the milling process. A swarf extraction system and the optional ionisation unit ensure the workstation remains clean.

Standards

Keine Standards gefunden

ISO 527
ISO 6259
ASTM D 638
ISO 179
ISO 180
ISO 16770
ASTM D 1822

Downloads

Features and Functionality

The IPT CNC-controlled system has been specially developed to meet the requirements of plastic pipe manufacturers and is able to accommodate even the largest test bars required for PE pipes (70 and 120 mm).

The basic machine: It is used together with the optionally available milling programs according to ISO, ASTM or all national or international standards with the additionally required clamping devices. The mounting plate of the milling machine has space for up to 5 clamping devices.

Simplicity of operation: Laboratory staff are not required to have any experience in programming CNC-controlled machines, as IPT always supplies the device with pre-installed programs for the templates required by the end user.

Additional programs can be added at a later date if required and delivered and installed remotely. The milling programs at IPT are optimised so that they run with optimal machine parameters to deliver the best results with the many different plastics. We have taken special care to design the sample clamping devices so that they can also accommodate samples taken from pipes.

Spindle speed: Our CNC milling machine can be operated in theory at speeds of up to 24,000 rpm. However, based on many years of experience, IPT has adapted the spindle speed and the feed rate to the corresponding materials to be milled in order to achieve optimum surface quality.

For wall thicknesses up to max. 120 mm: The IPT test bar milling machine has a servo motor and permanent monitoring of the axis positions.

Safety: The machining area is completely enclosed and electrically locked during operation. In emergencies, the milling process can be stopped using an emergency stop button.

The robustness, accuracy, speed and reliability are significantly higher compared to other devices on the market. Customised test specimens according to various standards such as EN, ISO, ASTM, etc. are available on request.

Periphery and Complementary

UNIVERSAL TENSILE TESTER

Model no. H3016

Tests on finished products

The universal tensile tester is used for performing tension, pressure or bending tests. The classic application is the tensile test. This involves subjecting a sample to an increasing tensile load until it breaks.

Standards

ISO 6259
ASTM D 638

TENSILE CREEP TESTER

Model no. 1727

Tests on raw materials

The tensile creep tester is intended for determining the resistance of plastic samples during a tensile creep test.

Standards

ISO 16770

TENSILE CREEP TESTER

Model no. 1719

Tests on raw materials

The tensile creep tester is used to determine the stress crack resistance of samples with a circumferential notch (FNCT – Full Notch Creep Test) under media influence.

Standards

ISO 16770

TENSILE CREEP TESTER

Model no. 1598

Tests on finished products

The tensile creep tester is used to determine the stress crack resistance of samples with a circumferential notch (FNCT – Full Notch Creep Test) under media influence.

Standards

ISO 16770

PENDULUM IMPACT TESTER

Model no. H3018

Tests on finished products

The pendulum impact tester enables testing across the entire spectrum of plastic impact testing, Charpy, Izod, impact and Dynstat in accordance with ISO and ASTM standards.

Standards

ISO 179
ISO 180
ISO 8256-A
ASTM D 256
ASTM D 4812
ASTM D 6110
DIN 53435

The product family